Page not found | Edge Products

PULSAR 2019 Ram 1500 5.7L Hemi - 32453

Suggested retail: $555.95
Your Price: $499.95
Orders over $100 ship free. Orders placed before 2 PM MT will ship same day.

ORDERS OVER $100 SHIP FREE. ORDERS PLACED BEFORE 2 PM MT WILL SHIP SAME DAY.

Add Ons

Overview
Product Details
Features
Video
Support
Promo

Ram 1500 Only - Introducing a ground-breaking product from Edge Products: The Pulsar. The Pulsar is an in-line computer that connects directly to the vehicle PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the trucks PCM, Edge has the ability to control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Adjust for tire size or gear ratio with the Pulsar. To make things even better, the Pulsar offers 8 performance levels that are changed by using the vehicle cruise control + and buttons on the steering wheel. Add Edge's award-winning Insight monitor and control power levels through the monitor, while keeping an eye on vital vehicle parameters. Power levels are displayed where the gear indicator shows on the dash. Pulsar installs in minutes and is the most exciting and innovative product on the market for 2015-2018 Ram 1500 Hemi trucks!

"

FEATURES

User-adjustable power levels via cruise control buttons

Adjustable power levels on-the-fly

Tire Size: 20" to 59"

Gear Ratio: 2.00 - 5.99

Improves economy, towing capabilities, and performance

Up to 8 performance levels

Power level displayed on OEM dash

Adds up to 30 HP and 30 ft-lbs TQ

Advanced ignition timing (spark)

User-selectable MDS on/off

Adjusts accelerator pedal response

Pairs with Edge's award-winning Insight CS2 or CTS2

"

You must configure your vehicle to view Product Features

Questions about buying this product? Our experts are available from 8 AM – 5 PM MT. Call today at 888.360.3343. Our sales team would be happy to answer any questions you have.

Terms/Conditions/Warranty Information

FAQs
Resources:
BUY ANY CTS2 LINE OF PRODUCT AND GET A FREE EAS - FREE EAS PROMO - May 1st – June 30th, 2019. t’s that time of year again, Edge’s Free EGT Promo (or other EAS Device)! Are you looking for deals as summer approaches and tax refund dollars are burning a hole in your pocket? Starting May 1st through June 30th, 2019 buy any Insight CTS2*, Evolution CTS2*, Juice w/ Attitude CTS2, Revolver Kit, Stage 1 Kit with the Evolution CTS2, or a Stage 2 Kit, and you qualify for a FREE EAS product,* directly from Edge! That’s up to a $152.95 savings. Below are the approved part numbers that qualify for a free EAS product and how you can claim their EAS product.
PULSAR 2019 Ram 1500 5.7L Hemi is rated 3.6 out of 5 by 16.
Rated 5 out of 5 by from Absolutely Works on a 2019 5.7 Etorque. Must update the unit ! The PULSAR unit may NOT arrive updated but once updated this unit 100%works and well. WOKE up the HEMI. DIFFERENT ENGINE with the PULSAR. Instant response and less Thottle needed to accelerate. More Power and Torque that I noticed. Possibly 30/30 respectively. Ask for the Update cable or opt for the "Insight" which is what I did and I'm Happy I did. The INSIGHT will automatically update the PULSAR and you'll be able to change ALL the settings from the INSIGHT, then you can either leave it attached to the OBDII or Disconnect it. I left mine attached because it provides much more info than regular tachs and dash...
Date published: 2018-12-17
Rated 2 out of 5 by from Don't expect big things I keep getting emails to review this product so here it goes. I bought this Pulsar for my new 2019 Ram Limited with 3.92 gear ratio. Installation was a breeze which is probably the only thing good about this purchase. I have not seen any change in MPG. 1500 miles prior to installation, I averaged 17.2 MPG. 1500 miles after Pulsar installation I averaged 17.4 not what I would call "worth it". On "tow" mode there is often "gear confusion (7-8)" when pulling a load. On "performance" mode top speed is still 105 mph and I have not noticed any gains in horsepower. THE ONLY THING THAT I CAN SEE THIS UNIT DOES IS CHANGE THROTTLE RESPONSE. I was expecting more. I would send it back. However, I can't find the box and shipping is on me. I guess i'll chalk this up to a poor buying decision. Hopefully there is something else better out there.
Date published: 2018-10-21
Rated 5 out of 5 by from Amazing!!! I added this to my 2019 5.7. Amazing doesn’t cover it. Nay sayers want to say it just makes the throttle more sensitive. It does, however that’s not all. Shift points are much more aggressive as well as the timing. Out of my primary mods, I added the Pulsar first and it was great. Then I added a Vararam Air Gabber and headers. My truck is seriously a beast in Performance mode. As you may have guessed, I didn’t buy this for the eco mode which as you would expect is a dog as it’s designed to be. I leave mine in Performance unless I’m towing the boat. Rather way, the best mod I’ve made. In fact, if I made just one mod it would be the pulsar. Hands down.
Date published: 2019-05-06
Rated 2 out of 5 by from Be careful..does somethings well but... I installed the Pulsar and you can tell the difference in TOW and Performance. BUT when I went to program in the tire size and gear ratio it caused my new RAM show all stability control features and avoidance features as needing service. The techs were nice in trying to clear out the error msgs but it needs to go to dealer to clear out. Tech could not figure out what caused it and now they want me to send the Pulsar unit back to them to reprogram. So the story will continue....
Date published: 2019-01-08
Rated 1 out of 5 by from Never left the driveway I really wanted this to work. Installation was easy, and straightforward. The first time I installed, I lost my backup camera, and my climate control did not function properly. I spoke with an Edge technician, tried a few things, then removed the unit. The camera and climate control were back the following morning. Edge sent a replacement unit within 3 days, but it it was worse. After another easy installation, the truck was very difficult to start. Once started, both the check engine and stability control lights were on. The truck remained very difficult to start, requiring extended cranking, so I removed the unit. I have returned to Edge and am awaiting my refund. Like I said, I really wanted this thing to work, but I never made it out of the driveway.
Date published: 2019-02-04
Rated 5 out of 5 by from 2 weeks and can't say enough good things about it 2019 RAM 1500 Limited 5.7L Hemi. I installed this within an hour of driving off the dealer lot. Unless you're a 6 footer it is a stretch to reach the bolts without a footstool. I did my install in a retail store parking lot. With that being said, once installed, the setup is easy. I adjusted for 3.92 gears and All-Terrain tires. I used the tire manufacturers numbers for the tire diameter and had to readjust to get the speedometer to match up with a GPS reading. After that, the Speedometer and MPG readings are spot on. The display readout at the top center of the gauge cluster, right under the RAM logo, is the best of any programmer hands down. The adjustments are instant and on the fly, just by pressing the up+ or down- of the cruise control. You see in plain English what tune is selected. It shares the cruise control up/down buttons so, if cruise control is set pressing the up/down adjusts your speed. All you need to do is disengage the cruise control, select the desired tune, and reengage the cruise control. I've been using programmers for over 15 years (A new truck every 3 years) and nothing has ever come close to the ease of use of the PULSAR. I like that the programs are stored on the PULSAR and the Truck PCM is not flashed, there is no trace if they scan your PCM. I'm 5' 8" and can change it back to stock, with a step stool, in less than 5 minutes. Just make sure you save the factory PCM mounting bolts. On the redesigned 2019 RAM 1500 the PCM is moved from behind the air box to the side of the battery box. Very easy access to install and return to stock for dealer service visits.
Date published: 2018-10-09
Rated 1 out of 5 by from Not Working With 2019 Ram I bought this product a couple of months ago. It worked great for the 1st month and a half. Now every 50-100 miles my truck throws 6-8 codes and goes into limp mode. I removed the Pulsar thinking it may be the truck itself. Everything worked fine for a couple of weeks. I re-installed the Pulsar and within 100 miles, the same thing happened.
Date published: 2019-04-10
Rated 3 out of 5 by from Great but misleading Great on the performance side but you will receive no help on the MPG. You will lose MPG's obviously because of the boosted performance. Granted I have only done 1000 miles on it but that should be enough to see what it is like. I will test out the towing side this summer and update my review. For the money, it is a toss up because it will depend on what you are looking for. Performance mode is great, Eco mode is useless, stay tuned for the rest. No update cable as well which I do hope they release updates and future ability to adjust for CAI etc.
Date published: 2019-05-10
  • y_2019, m_6, d_17, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_32453, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_edgeproducts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 6.29ms
  • REVIEWS, PRODUCT

I Just install on my 2019 ram, but i lose lot of option on my uconnect system, back up camera, heated seat, vent seat, sirus etc.. Need help please

Asked by: Martin
This should not be the case. Please call our tech support so we can get more information. Call 888-360-3343.
Answered by: JVenz
Date published: 2019-05-14

Seriously considering this purchase for my 2019. Questions I have - can you order the most current version and what do you need to do and have for future updates? Thanks for your time.

Asked by: SMS1
Yes if the Pulsar was ordered direct through us we do typically send it at the latest version. The Pulsar can be updated, if we ever come out with a new updates, by purchasing the update cable part number 98105, updating it with a CS2 or CTS2 Insight, or the product can be sent back to us to be updated for more information give us a call at 888-360-3343.
Answered by: Scott
Date published: 2019-04-29

How do you install updates to it?

Asked by: Russbone
The Pulsar can be updated, if we ever come out with a new updates, by purchasing the update cable part number 98105, updating it with a CS2 or CTS2 Insight, or the product can be sent back to us to be updated for more information give us a call at 888-360-3343.
Answered by: Scott
Date published: 2019-04-16

Does this prevent you from using your cruise control?

Asked by: Chris34
The cruise control would still work with the pulsar installed. When cruise control is turned off is when you would be able to adjust the power setting for the pulsar and when you have cruise turned on cruise control would work as normal.
Answered by: Scott
Date published: 2019-03-27

I have a 2019 ram 1500 classic was wondering if I need the one for the 2018 or 2019. On mine the pcm is on the firewall like the 18's.

Asked by: Jl440
If the truck is considered a 2019 Ram 1500 5.7L based off the registration or Vin I would recommend getting the Pulsar for the 2019 for more information or if you would like to order give us a call at 888-360-3343.
Answered by: Scott
Date published: 2019-03-04

If this product doesn't void the manufacture warranty. Then why do you suggests taking it off, before going in for warranty work? Honestly, that statement makes me hesitant on purchasing your product. Thanks

Asked by: Carlos24
It is very unlikely you would have a issue with warranty with this product, consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. However, if you happen to take the vehicle for warranty work we recommend to remove the product to avoid conflict with the dealer. The Pulsar does not leave a trace if it was removed so the dealer can not tell it was there.
Answered by: Scott
Date published: 2019-02-27

Is it possible to use Pulsar to remove the stock top speed limiter? Asking from Germany where this is relevant ;).

Asked by: ChrisJL
Unfortunately at this time the pulsar doesn't have the option to raise or adjust the speed limiter.
Answered by: Scott
Date published: 2019-01-02

Are the modes tunable and will edge offer other tunes? i.e. Can I optimize for intake and exhaust setup?

Asked by: Joe Clark
Unfortunately not with the Pulsar you aren't able to load custom tuning onto it at this point. The pulsar works good with a cat back exhaust and cold air intake but anything past that it is usually best to get a custom tune.
Answered by: Scott
Date published: 2019-01-02
  • y_2019, m_6, d_17, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_32453, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_edgeproducts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 9.97ms
  • QUESTIONS, PRODUCT