Page not found | Edge Products

EAS TEMPERATURE SENSOR -40F to 300F 1/8in NPT - 98608

Suggested retail: $45.06
Your Price: $40.55



The EAS Temperature Sensor is a -40 to 300 1/8 NPT supplied with the connectors to plug directly into Edge's Universal Sensor Input System. Using Edge's Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input and the CS or CTS monitor to allow you to view critical temperatures with the most state-of-the-art product on the market today.

Questions about buying this product? Our experts are available from 8 AM – 5 PM MT. Call today at 888.360.3343. Our sales team would be happy to answer any questions you have.

Terms/Conditions/Warranty Information


WARNING: Cancer and reproductive harm. Visit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 53.61ms
  • bvseo-msg: HTTP status code of 404 was returned;

How long are the wire leads on the pressure and temp sensors?

Asked by: Barry
Not sure, but one thing I do know is the Temp Sensor is not long enough to reach the rear differential cover on my 2003 F250 Crew Cab short bed.
Answered by: jeff15
Date published: 2019-03-04

Does this come with additional adapters, like 3/8 npt?

Asked by: Bobs
Unfortunately this sensor does not come with any additional adapters.
Answered by: Scott
Date published: 2018-12-30

How many of these can I run on a system? I have 2 diffs, Transmission, Transfer Case, Air temp pre/post.

Asked by: aernan
You can stack 8 EAS products together so you could have the potential to run 8 universal inputs part number 98605 which would let you add up to 16 sensors.
Answered by: Scott
Date published: 2018-05-01

Hello I ordered the CTS2 with the 98620. Do I need the 98608 to read the differentials temp ? Anything else ?

Asked by: maddog
Yes, to monitor differentials temps you will need part number (p/n 98608) along with our Universal Sensor Input system (p/n 98605).
Answered by: Tech
Date published: 2018-03-23

I have the edge cts2 on my 2007 5.9 cummins. Is this compatible with the cts2?

Asked by: Megacummin
Yes the temp. sensor part number 98608 is compatible with the cts2 but you would also need the universal input part number 98605 as well as the 98602 eas starter cable if you don't have it already.
Answered by: Scott
Date published: 2018-02-20

2005 Ram 2500 where does the sensor get installed

Asked by: Leo Linesch
What temperature are you looking to monitor?
Answered by: Tech
Date published: 2018-02-13

what else do i need besides the starter kit with the link connector thing. What does this plug into. Also does the super duty ford transmission 2003 have a 1/8 npt port

Asked by: Earlybird455
The insight would already read trans. temp. on a 03 Ford Super Duty off the pcm but if you want to add one separate you would need the sensor kit part number 98608, you would need the starter cable part number 98602, and the universal input part number 98605.
Answered by: Scott
Date published: 2018-02-02
  • y_2019, m_3, d_16, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_98608, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_edgeproducts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 80.54ms