Page not found | Edge Products

EAS PRESSURE SENSOR 0-100 psig 1/8in NPT - 98607

Suggested retail: $167.00
HolleyDay Price: $134.96
  • **DUE TO GROWING DEMAND AND INCREASED ORDER ACTIVITY, PLEASE ALLOW FOR 1 TO 2 ADDITIONAL DAYS FOR SHIPMENTS.**

    ALL SHIPMENTS TO CANADA ARE SUBJECT TO BROKERAGE FEES. ORDERS ARE SHIPPED MONDAY-FRIDAY. ANY PRODUCT ORDERED AFTER 2:00 PM MST OR ON S
    Overview
    Support
    Emissions

    Edge's EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge's Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edge's Pressure Sensor to monitor data such as Boost PSI, Lift Pump Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more


    Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.

    Questions about buying this product? Our experts are available from 8 AM – 5 PM MT. Call today at 888.360.3343. Our sales team would be happy to answer any questions you have.

    Terms/Conditions/Warranty Information

    FAQs

    WARNING: Cancer and reproductive harm. Visit www.prop65warnings.ca.gov

    EAS PRESSURE SENSOR 0-100 psig 1/8in NPT is rated 2.8 out of 5 by 6.
    Rated 5 out of 5 by from Great addition to CTS2 Simple and easy to use. The Edge products are awesome and wish I learned about them sooner. This device allows me to monitor my fuel pressure at my regulated return. Highly recommended for modified trucks
    Date published: 2018-01-19
    Rated 5 out of 5 by from Great solution to for sensors! I bought this for my 2005 ram 3500 12v swapped cummins and they are just a dream to use and set up.
    Date published: 2017-09-19
    Rated 4 out of 5 by from It works good. I bought to read fuel pressure and received a sensor that was " dry air only" called and was offered a replacement, but I needed it to work sooner than I could wait. I already had one of the same sensor I was using for turbo boost. So I switched them out and it worked perfectly. Only problem I have is you have to plug up a computer every time you add or change something to make it recognize the new sensor, other than that it works great
    Date published: 2017-07-03
    Rated 1 out of 5 by from Failed in a week I’ve added this sensor to my edge for my new air dog setup. It worked great for about a week. Then it would stop and randomly start from time to time. Ive run without a pressure readout for a year now not knowing the sensor was for dry air only. Do not get this if your planning to use it for what it’s intended for.
    Date published: 2019-12-22
    Rated 1 out of 5 by from Dry air application only Bought it to monitor fuel pressure. Received it and it says for Dry Air Application Only. This is not stated anywhere on the website. The box for it even says it can be used for fuel rail pressure and lift pump pressure, but the sensor itself says Dry Air Only. So frustrating!!! Bought the sensor and the universal input, but now I can’t use either of them! Also, the sensor is only good for 0-50 psia.
    Date published: 2018-02-03
    Rated 1 out of 5 by from Eas boost sensor This thing is junk 164.00 waste of money nowhere in the description states you need to Eas adapter says plugs right into your cts so you have to spend another 152.00 for the 3 wire plug/adapter. I will never buy a edge product again almost 1000 dollars in and I'll I can read is egt
    Date published: 2017-10-06
    • y_2020, m_11, d_24, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_6
    • loc_en_US, sid_98607, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 16.89ms
    • REVIEWS, PRODUCT

    Can you get this kit with a 150psi sender to install into a compressed air tank?

    Asked by: Bugsquad
    Unfortunately we don't offer a 150 psi sensor but you could add our 98605 part number then add a sensor separate. If you find a 150 psi sensor that is 0-5v you could make it work you would just need to map it through our mystyle software that you can download off the website under the updates tab.
    Answered by: Scott
    Date published: 2019-09-01

    Can this be used to monitor boost on a 2007 5.9L? If so are any other parts needed to tap into the intake elbow?

    Asked by: Martin1980
    Assuming you have one of our CS/CS2 or CTS/CTS2 product lines then Yes, the part number 98607 0-100 psi pressure sensor can be used for boost pressure, that plugs directly into the universal input system part number 98605, you will also need the eas starter kit cable 98602. Links below: https://edgeproducts.com/shop/eas-universal-sensor-input-5-volt https://edgeproducts.com/shop/eas-starter-kit-cable
    Answered by: Tech
    Date published: 2019-04-17

    can this monitor oil pressure buy using an adaptor on 6.0 LQ4 at stock location?

    Asked by: neal
    Yes the part number 98607 0-100 psi pressure sensor can be used for oil pressure.
    Answered by: Scott
    Date published: 2019-12-03

    If I upgrade my insight cts2 to the evolution program will it read boost psi on my 06 6.0 or do I still need to buy the starter kit and boost solenoid?

    Asked by: Gage0820
    If your referring to a 06 6.0 powerstroke then the evolution or the insight would read boost pressure right off the trucks computer without having to add a pressure sensor.
    Answered by: Scott
    Date published: 2018-03-15

    Does this sensor come with the esa adapter?   The part that is linked to the other esa devices and the plug body on the other end for the sensor?      Just like an egt sensor?

    Asked by: Russ97
    No it doesn't come with the universal input to hook up the sensor you would need to purchase that separate. The universal input part number is 98605 and you would need the eas starter cable part number 98602 unless you already have it.
    Answered by: Scott
    Date published: 2018-06-26

    Can a edge evolution cts2 read boost on a 02 Ford 7.3L powerstroke?    I just recently bought a cts2 and it says the boost it only 10 psi when driveing normal and when on the throttle.  Is it reading correctly? 

    Asked by: Russ97
    Yes the evolution cts2 will read boost off the trucks computer on a 02 7.3L powerstroke without having to add a pressure sensor.
    Answered by: Scott
    Date published: 2018-02-13

    I’ve got a insight cts3 with eas egt probe and eas starter cable. What do I need to hook up a pressure sensor for fuel? Is the sensor wet or dry?

    Asked by: Compound12vFummins

    I have the EAS boost sensor connected along with the EGT sensor on my 7.3. The boost sensor will not read over 6psi and is very slow to react to changes in pressure. I know for a fact that my boost is much higher but does not seem reflected on the screen.

    Asked by: Ben907

    How do I get this sensor to read zero in a boost pressure application. With the truck off the sensor is reading atmospheric pressure. 

    Asked by: Albisu0126

    Will this kit read drive pressure

    Asked by: Goose

    How accurate is this 0-100 psi sensor for boost pressure up to 30 psi? Just hooked it up and set up as 0-100 psig in eas settings and it is way off from my mechanical gauge. both are connected to the intake right next to each other. tried 0-50 psi also.

    Asked by: hillbilly bob

    Can this be used to monitor coolant pressure?

    Asked by: F250 money pit

    Looking to read boost on my 2005 lly. Already have a CTS2 with an egt probe plugged in. What all do I need?

    Asked by: NastyNate22

    can the fuel pressure sensors be used to monitor oil psi? i have a drag truck that is gutted and am wanting to use the insight as the main monitor. max oil pressure reading will be around 75psi

    Asked by: Ctwins99

    Does it come ready to plug into the EAS round plug or do we have to buy another cable on top of this?

    Asked by: clayto

    03 Ram 5.9 Cummins HO with CP3 injector pump and still using stock filter, also have in tank fuel pump.....where should I hook up this pressure sensor. I have the EAS cable already with EGT sensor in place and the insight cs2 monitor.

    Asked by: TomK

    Can I use this to monitor exhaust back pressure or would egt's be too hot for it?

    Asked by: Farmer72

    What do I need to use The eas pressure sensor with my cts3 monitor 

    Asked by: Chubbz45

    I have the edge cts2. I have the egt probe and it works fine. I have a 6.7l powerstroke diesel and want to monitor the oil pressure do you offer something just for the oil pressure so I don't have to spend $350 for that package which also comes with the E

    Asked by: speedy2643
    • y_2020, m_11, d_24, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
    • cp_2, bvpage2n
    • co_hasquestionsanswers, tq_27
    • loc_en_US, sid_98607, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 74.77ms
    • QUESTIONS, PRODUCT