Page not found | Edge Products

EAS COMPETITION KIT - 98617

Suggested retail: $445.00
Your Price: $399.95
  • **DUE TO GROWING DEMAND AND INCREASED ORDER ACTIVITY, PLEASE ALLOW FOR 1 TO 2 ADDITIONAL DAYS FOR SHIPMENTS.**

    ALL SHIPMENTS TO CANADA ARE SUBJECT TO BROKERAGE FEES. ORDERS ARE SHIPPED MONDAY-FRIDAY. ANY PRODUCT ORDERED AFTER 2:00 PM MST OR ON S
    Overview
    Support
    Emissions

    The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbos and other mods, where the stock sensors just arent enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.


    /span>


    The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT.


    /span>


    The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer.


    /span>


    The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories.


    /span>


    98617 - EAS Competition Kit includes:


    /span>


    - EAS Starter Kit


    - EAS EGT Probe


    - EAS Universal 5 Volt


    - EAS 0-100 PSIg Pressure Sensor


    - EAS -40F to 300F Temperature Sensor

    Questions about buying this product? Our experts are available from 8 AM – 5 PM MT. Call today at 888.360.3343. Our sales team would be happy to answer any questions you have.

    Terms/Conditions/Warranty Information

    FAQs

    WARNING: Cancer and reproductive harm. Visit www.prop65warnings.ca.gov

    EAS COMPETITION KIT is rated 5.0 out of 5 by 3.
    Rated 5 out of 5 by from Easy install Easy kit to install and with the new plug and play system pretty quick simple to do
    Date published: 2020-01-30
    Rated 5 out of 5 by from A must for towing The EGT probe is great to have. Everybody already knows that. The real gold nugget with this kit is the temp and pressure sensors. My lift pump quit working on me in the middle of driving and I didn't know until way later when I was going up a huge hill with a 10k pound trailer and the truck shut off. I hooked the pressure sensor up to the pump so I can see if it's working and set it to tell me if it quits working so I can avoid that. I'm using the temp sensor for oil temp. I mainly tow with this vehicle. It's been great to be able to see that temp. My oil got hotter than I thought it would have, so I drive it a differently now. If you tow a lot, you should be watching the oil temp. This kit is the way to go.
    Date published: 2019-11-16
    Rated 5 out of 5 by from Great feature!! Great feature on monitoring the truck. If you want to know what your truck is doing, This is the kit to have.
    Date published: 2017-10-18
    • y_2020, m_8, d_9, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_98617, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 109.94ms
    • REVIEWS, PRODUCT

    Is the suction cup mount the only option for the cts2 insight or will the pod accommodate it? Looking for a more clean dash install if possible.

    Asked by: Matthew0273
    We do offer pillar mounts or dash pod mounts depending on the vehicle for more info give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2020-02-03

    I need to measure boost psi, and egts. What would be my best route to do so? I already have the edge cts2, I just need sensors that will give me accurate readings

    Asked by: Bryce parrott
    Yes this EAS competition kit part number 98617 would be what I would recommend if you are looking to add boost psi and EGT.
    Answered by: Scott
    Date published: 2019-05-13

    I’ve got Autometer gauges and probes for EGT Trans Temp, Boost that come with my 2002 7.3. Are your all’s probes the same size fit? 

    Asked by: Junior
    I am not sure what size Autometer uses but we use a 1/8 NPT fitting for the EGT and Pressure sensor which is pretty standard most likely they are the same sized fitting.
    Answered by: Scott
    Date published: 2019-10-31

    Will the pressure sensor that comes in the kit work for fuel pressure?

    Asked by: DerrickG
    Yes the pressure sensor will work for fuel pressure but you would need to request a wet sensor when the pressure sensor is being ordered. For more info please give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2018-08-09

    Im trying to monitor boost, trans temp, fuel pressure and egts. Will the comp kit have everything included such as boost bolt, banjo and snubber valve or does that stuff need to be purchased separately? Also will I need another sensor to measure these 4?

    Asked by: RdbCO
    The comp. kit would work for everything that you are trying to read on your screen except you would need another pressure sensor if you are wanting to add the sensors separate and not read off the vehicle computer depending on the vehicle. You would need to include part number 98605 and 98607 because the kit is only going to come with 1 pressure sensor and the universal input only has two spots. A banjo bolt would not be included and you wouldn't need a snubber valve with our pressure sensors.
    Answered by: Scott
    Date published: 2018-12-30
    • y_2020, m_8, d_9, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_en_US, sid_98617, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 46.98ms
    • QUESTIONS, PRODUCT