Page not found | Edge Products

2015-2018 Ram 5.7L Hemi Pulsar Kit (Pulsar and Insight CTS2) - 33550

Suggested retail: $999.95
Your Price: $899.95
  • Orders over $100 ship free.
    Product Details

    Ram 1500 Only - Introducing a ground-breaking product from Edge Products: The Pulsar. The Pulsar is an in-line computer that connects directly to the vehicle PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the trucks PCM, Edge has the ability to control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Adjust for tire size or gear ratio with the Pulsar. To make things even better, the Pulsar offers 8 performance levels that are changed by using the vehicle cruise control + and buttons on the steering wheel or with the Insight Monitor. Edge's award-winning Insight monitor allows you to control power levels through the monitor, while keeping an eye on vital vehicle parameters. Power levels are displayed on the dash as well as on the monitor. Pulsar installs in minutes and is the most exciting and innovative product on the market for 2015-2018 Ram 1500 HEMI engine trucks!



    User-adjustable power levels via cruise control buttons

    Adjustable power levels on-the-fly

    Tire Size: 20" to 59"

    Gear Ratio: 2.00 - 5.99

    Improves economy, towing capabilities, and performance

    Up to 8 performance levels

    Power level displayed on OEM dash

    Adds up to 30 HP and 30 ft-lbs TQ

    Advanced ignition timing (spark)

    User-selectable MDS on/off

    Adjusts accelerator pedal response

    Pairs with Edge's award-winning Insight CS2 or CTS2


    You must configure your vehicle to view Product Features

    Questions about buying this product? Our experts are available from 8 AM – 5 PM MT. Call today at 888.360.3343. Our sales team would be happy to answer any questions you have.

    Terms/Conditions/Warranty Information


    This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number
    The following vehicles are considered Emissions Controlled Vehicles:

    • 1966 and newer U.S. manufactured California Certified vehicles
    • 1968 and newer U.S. manufactured Federally Certified vehicles
    • 1968 and newer Foreign manufactured vehicle

    2015-2018 Ram 5.7L Hemi Pulsar Kit (Pulsar and Insight CTS2) is rated 3.5 out of 5 by 2.
    Rated 5 out of 5 by from Pulsar and Insight CTS2 Beyond my expectations. Easy to upgrade firmware, and the performance with the Pulsar is so much better than I had hoped for. The Pulsar really opened up my Hemi 5.7! I received the product quickly and installed in minutes. The only thing that would make it batter would be to include the cable to update the firmware for the Pulsar. I had to buy that separately. I didn't know this until I was trying to upgrade everything. At least put that in the Pulsar web page when buying. Donnie
    Date published: 2019-06-19
    Rated 2 out of 5 by from Not bad It’s not bad but I don’t feel like it does too much for what you pay
    Date published: 2020-01-17
    • y_2020, m_1, d_25, h_15
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_2
    • loc_en_US, sid_33550, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 16.26ms

    Does this product still require replacement/unlock of PCM?

    Asked by: TCCC2019
    With the Pulsar you do not need to get the PCM unlocked for the pulsar to work. It would just be ready to bolt in and go for more information give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-11-01

    Does this product allow programming of transmission if I'm upgrading to lower rear axle ratio not offered from the factory? Ex. 4.10:1 or 4.56:1

    Asked by: Nickpate
    The Pulsar kit does give you the option to adjust for gear ratio for more info or if you would like to order give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-09-30

    Is this just a plug and play type set up?   Connect it and run wires and set up the monitor and let it connect and go ? 

    Asked by: StanTow
    Yes the Pulsar Kit is a plug and play setup but it isn't a bad idea to check for updates before installing for more information give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-09-25

    Does Insight will do the shifting in different modes on the screen rather setup through the truck cruise control system? Do I really need to it up through the truck system if I have the Insight CTS2 installed? Plus, Can I update the Pulsar through Insight

    Asked by: XRam
    Yes the CTS2 Insight that comes with the Pulsar kit you would be able to control the power level through the CTS2 screen and you are able to update the Pulsar using the CTS2 for more info give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-09-23

    Will there be an update to the pulsar to control the transmission line pressure if you did s shift kit upgrade?

    Asked by: Leo420
    The pulsar currently isn't going to be custom tunable and doesn't offer any transmission tuning at this point for more information give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-08-16

    Will installing this product violate the perameters of factory and/or third party warranties?

    Asked by: Stone8008
    It is very unlikely you would have a issue with warranty with this product, consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. However, if you happen to take the vehicle for warranty work we recommend to remove the product to avoid conflict with the dealer.
    Answered by: Scott
    Date published: 2019-07-01

    Can the pulsar pair with an evolution cts2? And if so does it do anything besides monitor stuff on the engine? 

    Asked by: Dw13
    The Pulsar won't pair with a CTS2 Evolution but will with a CTS2 Insight for more information or if you would like to order give us a call at 888-360-3343.
    Answered by: Scott
    Date published: 2019-06-05

    Can you still use the cruise control with this set up?

    Asked by: Big jack
    Yes, you would need to either use the Insight to change the power levels of the Pulsar or turn off the cruise control to change power levels. But the cruise control will work the same.
    Answered by: JVenz
    Date published: 2019-06-17
    • y_2020, m_1, d_24, h_18CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_18
    • loc_en_US, sid_33550, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_edgeproducts
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 18.06ms