EDGE REVOLVER 7.3L PERFORMANCE KITS
Control the power of your Ford 7.3L Power Stroke on-the-fly with the Revolver Kit.
Edge Revolver Kit
All-new six-position Edge Revolver chips for the Ford 7.3L diesel can now be controlled by the Insight CTS2! Change the power levels of your chip with using the touchscreen of the Insight CTS2. These new kits will include the Revolver chip, Insight CTS2, and the new EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable horsepower, up to 140 horses, using Edge’s Insight CTS2 display. Simply pull down the top menu and adjust the power levels or select the Retro Screen which allows switching between multiple power levels on-the-fly!
– Plug-in performance chip to operate with your specific 7.3L box code
– Shift-on-the-fly power levels with the Insight CTS2
– Full in-cab, state-of-the-art digital gauges
– Up to six options for performance and other various modes
– Revolver chips are loaded with standard or custom tunes
– Calibrations for your specific year, make, model, and transmission
– Up to 140 HP and 250 lb-ft TQ
– Increase fuel economy
– Easy installation
Already own an Insight CTS2 buy the Revolver and the new EAS Revolver switch cable (pn 98621) to connect the Revolver and the Insight CTS2.
Up your performance for your Ford 7.3L Power Stroke
The biggest benefit of using the Edge Revolver chip over the competition is simple: Edge makes the BEST Diesel tunes. At Edge products, diesel performance is our passion. Every day we install cool new toys on our in-house diesel fleet in order to create an extraordinary driving experience. Our engineers build the products for people like themselves- Diesel Nuts! You can expect better tunes, better performance gains (level for level) and better drivability from an Edge Revolver chip than any other chip around for your 7.3L. We are proud diesel people, and we set out to prove it- just look at the dyno sheet!
Edge Revolver Chip Tune Levels:*
Level 1: Stock Tune
Level 2: High Idle
Level 3: 50 Horsepower
Level 4: 75 Horsepower
Level 5: 100 Horsepower
Level 6: 140 Horsepower
How to Order an Edge Revolver Chip
You will need some information from your truck before you order an Edge Revolver Chip. First, you will need the “ECU Code” from your truck’s ECU. It is easy to find- just look for your ECU which will be located behind the Driver’s Side Kick Panel where there is a black plug that will have a sticker on the plug that shows the ECU code. In the case that this sticker isn’t there or the plug has been removed then you can look in the engine compartment where the main harness connection connects to the ECU. In some cases you can put your phone down by the connector and take a picture of it to reveal the ECU code. If you can’t see it then you may need to remove the ECU. There will be a large 4 Digit Code there that are 3 letters and 1 number. These “ECU Codes” identify what ECU is in your truck, and they come in groups. Some examples might be NVK2 and NVK4, which share the same tunes which would have the same “Box Code”, but have different ECM codes. You will need to give your ECM code to the dealer that is burning your chip, or buy the chip pre-programmed for your ECM code (or box code family). Here is an example of what your ECM code will look like on the ECM.